Your bathtub will look stunning
Resurface your bathtub with EKOPEL 2K using the pouring method—no rollers or brushes needed—in just 3–4 hours.
Your bathtub will look truly impressive
Resurface your bathtub with EKOPEL 2K using the pour-on method—no rollers or brushes needed—in just 3–4 hours.
What would you like to resurface?
Choose the right solution for your project
Why Choose EKOPEL 2K?
Odourless
No chipping
A smooth finish
High impact resistance
Usable after 24 hours.
No disassembly required
Made in the EU
Odourless
No peeling
A smooth coating
High impact resistance
Usable after 24 hours.
No dismantling required
Made in the EU
How EKOPEL 2K Works – Simply and Effectively
Clean the bathtub
Remove silicone and thoroughly clean the bathtub.
→
Mix A+B
Thoroughly mix components until uniform.
→
Pouring the material
Pour material onto the bathtub edge, walls, and floor.
→
Warm with a hairdryer
After the full coating, warm the floor with hot air.
Our Most Popular Products
EKOPEL 2K-CLASSIC Bathtub Resurfacing Coating - Complete DIY Kit
EKOPEL 2K-CLASSIC Bathtub Resurfacing Coating - Complete DIY Kit
€134,42 EUR
Sale price
€134,42 EUR
Regular price
DIY or PRO – The Choice Is Yours
DIY
For DIY enthusiasts looking to resurface their bathroom themselves.
We guide you every step of the way.
PRO
For craftsmen and businesses.
Benefit from training, support, and professional terms.
Become an EKOPEL PRO
Discover the professional application of our materials and offer your customers a modern, environmentally friendly bathtub resurfacing solution without the toxic odours common in outdated enamel coatings.
Before / After – Genuine Results
Resurfacing a bathtub with typical signs of wear
Transforming a coloured bathtub into a white bathtub
Showers, sinks, and washbasin countertops can also be resurfaced.
Over 15 Years of Experience
Trusted by DIY enthusiasts and professionals alike
VOC close to zero
European Quality
Frequently Asked Questions
What distinguishes EKOPEL 2K Classic, Optimum, and Gold?
All EKOPEL 2K materials were specifically developed for resurfacing old bathtubs. They offer excellent adhesion, almost odourless application, and high impact resistance.
The main differences lie in the curing time and the additional UV protection.
EKOPEL 2K Classic is applied using the pouring method and cures within 48 hours. This option is the most cost-effective solution for bathtub resurfacing.
EKOPEL 2K Optimum is also applied by pouring but cures within just 24 hours, allowing the bathtub to be used again more quickly.
EKOPEL 2K Gold also cures within 24 hours and provides enhanced protection against sunlight. If your bathroom has a window or the bathtub is regularly exposed to sunlight, we recommend EKOPEL 2K Gold.
If the bathtub is not exposed to direct sunlight, EKOPEL 2K Classic or EKOPEL 2K Optimum can be used without any issues.
What is the difference between EKOPEL 2K and EKOPEL Roll-On?
EKOPEL 2K is applied using a pouring technique. The material is poured onto the edges and walls of the bathtub, flows evenly downwards, and spreads across the base. This creates an extra thick, smooth, and glossy coating.
We recommend EKOPEL 2K if you can remove the drain fittings or at least the drain cover. This allows excess material to drain away cleanly and ensures an even application of the coating.
EKOPEL Roll-On is applied with a roller, usually in two coats. This product is ideal when the drain cannot be dismantled or when a simpler application with a roller is preferred.
EKOPEL Roll-On is also an excellent solution for surfaces where the pouring method is not suitable.
At what room temperature can EKOPEL coatings be used?
The ideal room temperature for application is 21–23 °C. Before resurfacing, the bathroom should be brought to this temperature at least 24 hours in advance and maintained for 1–2 days afterwards to ensure the material spreads evenly and cures properly. The materials must be stored for at least 2 days prior to use in a warm, dry place. This ensures the correct viscosity and optimal application.
How to care for your bathtub after resurfacing?
To keep the new coating looking its best for a long time, please follow these guidelines:
- Use mild, non-abrasive cleaning agents suitable for bathtubs.
- If the cleaning agent is coloured, test it first on a small, inconspicuous area before cleaning the entire bathtub.
After application, immediately work the cleaning agent into a foam with a soft sponge and spread it evenly. - Rinse the bathtub thoroughly with water afterwards to completely remove all cleaning agent residues.
What should be avoided?
- Do not dye your hair in the bathtub. The aggressive alkalis in hair dyes can damage the coating.
- Avoid using coloured bath additives such as bath bombs or strongly staining bath salts, as these can attack or discolour the surface.
- Do not use abrasive sponges, scouring agents, or aggressive cleaning products.
Does the old coating need to be removed?
If the bathtub has been previously coated and the old coating is peeling, we recommend removing these loose areas before applying EKOPEL.
It is not necessary to remove the entire old coating completely. Only remove the sections that are peeling or no longer firmly adhered.
Next, smooth any sharp edges and transitions by sanding to ensure an even application of the new EKOPEL coating.
Not sure which product is right for you?
Send us a photo and receive our personal recommendation.
- Free consultation
- Custom product advice
- Quick response
Send us a photo via WhatsApp or through the online chat on our website, bottom right.